List stations heard on user ports
Syntax: MH <port> <count> <call>
The Hearlist, up to now only used internally for routing, can be
displayed now. All heard callsigns are inserted into the list. This also improves the port
routing. The list contains max. 200 callsigns and is saved to HD on PCs every ten minutes.
Options:
<port> Portnumber 0-15, list only callsigns heard on this port
<count> number of callsigns to be listed. Default is 30. <count> must be in
the range 16 ... 200.
<call> Look for this callsign. SSID is ignored if not specified.
The MHeard-Command by default displays the last 30 direct heard
callsigns. Optionally, a port number, a callsign (with or without SSID) or a number (16
... 200) of entries to be listed, may be given.
