Info CXhosted.gif (1517 bytes)

 

Guestbook
Sign it
View it

Up

Request the INFO text file from the node

Syntax: I <CR>

The I-Command prints out the text-file INFO. This text can be entered by the sysop using the WRITE command and should provide information about the node (QTH, equipment, antennas and so on). After a cold reboot the text is empty.

 

[ Home ] [ Up ] [ Beacon ] [ Calibrate ] [ Connect ] [ Destinations ] [ Find ] [ Help ] [ Info ] [ Kill ] [ Latest ] [ Links ] [ Local ] [ Mail ] [ MHeard ] [ Mode ] [ Mycall ] [ Quit ] [ Reset ] [ Restart ] [ Talk ] [ Users ] [ Write ]

RMNC/FlexNet, PC/FlexNet and the accompanying utilities and
documentation are a product of Gunter Jost, DK7WJ.  See copyright document!