Kill an existing QSO
Syntax: K <QSO-No> <CR>
The KILL-Command terminates an existing QSO. The QSO number must be
specified (U-Command, 1. column). Why this
command? It is not made to let the sysop feel like the "big boss", but sometimes
it is necessary to kill a QSO.
Example: Station A is connected to station B, and A transmits a longer
text to B. After a certain time, the receiver of the text, station B, gets busy, i.e. his
TNC sends RNR. When this state is not fixed by B itself, the QSO will last for ever, at
least up to the next blackout.
