Request the list of nodes that a FIND will be performed on
Syntax: S <CR>
The SETSEARCH-Command displays all digipeaters via which the FIND-Command searches for someone. Example:
=>S<CR>
search digi’s:
DB0ODW
DB0KT via DB0ODW
DB0AAI via DB0ODW
DB0DA via DB0ODW
DB0IE via DB0ODW
=>
The frame generated by the FIND-Command
would be sent via DB0ODW, DB0KT, DB0DA, DB0AAI and DB0IE.
Note As a SysOp, you use the WRITE command to
set this list. |
