Beacon CXhosted.gif (1517 bytes)

 

Guestbook
Sign it
View it

Up

Show Beacon text file

Syntax: B <CR>

The B-Command shows the current beacon file. In this file you can see which beacon is sent on which port in which interval. After a cold reboot the default beacon is sent on port 0 or 1. 

The beacon text file is set by the WRITE command.
 

[ Home ] [ Up ] [ Beacon ] [ Calibrate ] [ Connect ] [ Destinations ] [ Find ] [ Help ] [ Info ] [ Kill ] [ Latest ] [ Links ] [ Local ] [ Mail ] [ MHeard ] [ Mode ] [ Mycall ] [ Quit ] [ Reset ] [ Restart ] [ Talk ] [ Users ] [ Write ]

RMNC/FlexNet, PC/FlexNet and the accompanying utilities and
documentation are a product of Gunter Jost, DK7WJ.  See copyright document!